DuDuZui Car Rear Spoilers,1.5m/4.9ft Universal Matte Black Car Rubber Strip Bar Spoiler Tailfin Tail Fin Rear Wing Tailgate Hatchback for Most Popular Cars
OVER 760 RATINGS
- 【ADJUSTABLE】L 1.5m x W 3.5 cm ,the car rear spoiler can be cut if too long for your car
- 【UNIVERSAL】The car trunk spoiler lip kit is universal ,can use for most popular cars
- 【WATERPROOF】High-density waterproof material, water directly condenses into water droplets on the surface.
- 【DECORATION&PROTECTION】The car rubber spoiler can be used for pressure tail, top wing, front stalls spoiler glass.It can fit perfectly according to the original car range and make your car looks great.
- 【HOW TO INSTALL】1.Clean the pre-installed position,make sure the position is clean and dry before install.2.Measure the length of tail in need. 3.Cut off excess length if too long,heat it if possible. 4.Use the adhesion promoter(wipe paper) to wipe the pre-installed position,then waiting about 10s.5.Tear the cover of glue of one end of universal spoiler and stick it on car,then tear more and stick it from one end to another. 6.Put on the 2-end sleeve and stick it slowly with strength.
- 【FOR BETTER EFFECTIVE】please use a heat gun or hair dryer to heating up the Tape or Glue;they go on easy if you heat up each section of the rubber
- 【TIPS TO PREVENT CAR SPOILER FALL OFF】 1.Please install the car spoiler in good weather day or warm indoor. it would be better if use a heat gun or hair dryer to heating the item;they go on easy if you heat up each section of the rubber.(HIGHLY RECOMMEND) 2.Follow installation instruction. 3.Leave the car alone for at least 24 hours after install the car universal spoiler
